TSX-V: ROCK Last: $0.02 Change: 0.00 OTCQB: RRRLF Last: $0.01 Change: -0.00

Rockridge Commences Drilling Program at Knife Lake Copper Project, Saskatchewan


March 18, 2021

Vancouver, BC – Rockridge Resources Ltd. (TSX-V: ROCK) (OTCQB: RRRLF) (Frankfurt: RR0) (“Rockridge” or the “Company”) is pleased to announce that it has recently commenced a diamond drilling program at its Knife Lake Copper Project located in Saskatchewan, Canada (the “Knife Lake Project” or “Property”). A minimum of 1,600 metres in 6 to 8 drill holes are planned in the fully funded program. The Knife Lake Project, consisting of 49 claims totaling 32,663 hectares (80,712 acres), is an advanced-stage copper, silver, zinc and cobalt exploration property in Saskatchewan.

Knife Lake VMS Project Location Map:
https://www.rockridgeresourcesltd.com/_resources/images/Knife-Lake-regional-overview-2021.jpg

Drilling will focus on discovering VMS-style, predominantly copper deposits along newly defined conductors as well as at depth, underneath the Knife Lake deposit. Several targets in the Gilbert Lake North and South targets will be tested which are approx. 5 to 6 km to the west of the deposit. Infill drilling is also planned in the immediate area of the 2019 maiden resource at the deposit area. Downhole geophysics, borehole electromagnetics (BHEM) will be utilized extensively throughout the program.

Knife Lake Project Airborne Geophysical Results:
http://www.rockridgeresourcesltd.com/_resources/images/Airborne-EM-results-03-10-2021.jpg

Highlights

  • A minimum of 1,600 metres in 6 to 8 drill holes are planned in the fully funded program
  • Drilling will focus on discovering VMS style copper deposits along newly defined conductors as well as at depth, underneath the Knife Lake VMS deposit
  • Gilbert Lake North and South targets with be drill tested and represent new exploratory target areas with very little historical exploration carried out
  • Infill drilling is also planned in the immediate area of the 2019 maiden resource at the deposit
  • Rockridge completed first work program in the last ~20 years in 2019, with highlight results including 2.03% Cu, 9.88 g/t Ag, 0.19 g/t Au, 0.36% Zn, and 0.01% Co (2.42% CuEq) over 37.6m beginning at 11.2m in hole KF19003
  • Deposit is thought to be a remobilized portion of a “primary” VMS deposit; most of the historical work has consisted of shallow drilling at the deposit area with little regional work carried out and limited deeper drilling below the deposit
  • Over 300 holes provided data for first NI 43-101 resource estimate of the shallow Knife Lake deposit
  • Knife Lake NI 43-101 resource estimate provides excellent anchor for Project: Ind. resources: 3.8 MT at 1.02% Cu Eq. Or 3.8 MT at 0.83% Cu, 3.7 g/t Ag, 0.097 g/t Au, 82 ppm Co,1740.7 ppm Zn. Inf. resources: 7.9 MT at 0.67% Cu Eq. Or 7.9 MT at 0.53% Cu, 2.4 g/t Ag, 0.084 g/t Au, 53.1 ppm Co, 1454.9 ppm Zn.
  • There is strong discovery potential in and around the deposit as well as at regional targets on the Property; modern exploration techniques and methods are being utilized with a goal of making new discoveries

Jonathan Wiesblatt, CEO of Rockridge Resources, commented: “We are very pleased that the exploration program has started on time at Knife Lake. The regional targets defined through an extensive VTEM geophysical program completed earlier this month have further defined and enhanced our understanding of the geological settings in and around the Knife Lake deposit.  Several hundred holes and thousands of metres have been carried out at the Knife Lake deposit historically with very little focus on the opportunities near the deposit and regionally. We are encouraged by the data from the geophysical program and are looking forward to advancing the Project beyond the Knife Lake deposit with this drill program representing the first drilling campaign carried out in decades to test the regional potential of the project. Furthermore, the copper market has been strengthening in recent months amidst a global economic recovery and the continued trend towards more electrification and clean energy initiatives around the world.”

Knife Lake Priority Target Areas:
https://www.rockridgeresourcesltd.com/_resources/images/Knife-Lake-Airborne-EM-Feb2021.jpg 

Knife Lake Geology and History: 

The Knife Lake Project is interpreted to be a remobilized VMS deposit. The stratabound mineralized zone is approximately 15m thick and contains copper, silver, zinc, gold and cobalt mineralization which dips 30° to 50° eastward over a known strike-length within Rockridge’s claim area of 3,700 metres, and a known average down-dip extension of approximately 300 metres.  

Knife Lake Deposit Map:
https://www.rockridgeresourcesltd.com/_resources/projects/KnifeLake-Fig2.jpg

The deposit is hosted by felsic to intermediate volcanic and volcaniclastic rocks which have been metamorphosed to upper amphibolite facies. The deposit contains VMS mineralogy which has been significantly modified and partially remobilized during the emplacement of granitic rocks. The mineralization straddles the boundary between two rock units and occurs on both limbs of an interpreted overturned fold.

The Company completed twelve holes consisting of 1,053 metres of diamond drilling in the 2019 winter drilling program. This represented the first drilling on the property since 2001 and had two primary objectives: confirm the tenor of mineralization reported by previous operators and expand known zones of mineralization. Highlights from the drill program included previously reported hole KF19003 which intersected net-textured to semi-massive sulphide mineralization from 11.2m to 48.8m downhole. This 37.6 metre interval returned 2.03% Cu, 0.19 g/t Au, 9.88 g/t Ag, 0.36% Zn, and 0.01% Co for an estimated 2.42% CuEq. Additionally, previously reported drill hole KF19001 intersected net-textured to fracture-controlled sulphide mineralization from 7.5 metres to 40.6 metres downhole. This 33.1 metre interval returned 1.28% Cu, 0.12 g/t Au, 4.80 g/t Ag, 0.13% Zn, and 0.01% Co for an estimated 1.49% CuEq.

Compilation and initial modelling indicate potential for expansion of the deposit at depth. The recent drilling focused on resource upgrade as well as infill drilling between historical holes. The program gave the Company’s technical team valuable insights into the property geology, alteration, and mineralization that will be applied to future regional exploration on the highly prospective and underexplored land package.  

The Knife Lake deposit is a near surface VMS deposit starting a few metres below surface and the deposit remains open at depth and along strike for potential resource expansion. Recently Rockridge announced a maiden NI 43-101 resource estimate for the Knife Lake deposit (see the News Release dated August 14th, 2019) which consisted of an indicated resource of 3.8 million tonnes at 1.02% CuEq at a 0.4% CuEq cut-off (3.8 MT at 0.83% Cu, 3.7 g/t Ag, 0.097 g/t Au, 82 ppm Co, 1740.7 ppm Zn). In addition, there is an inferred resource of 7.9 million tonnes at 0.67% CuEq at a 0.4% CuEq cut-off (7.9 MT at 0.53% Cu, 2.4 g/t Ag, 0.084 g/t Au, 53.1 ppm Co, 1454.9 ppm Zn). Refer to the NI 43-101 Technical Report on the Mineral Resource Estimate for the Knife Lake Property, Saskatchewan dated September 27, 2019 filed on Sedar.

Qualified Persons:

Kerry Bates, P. Geo., a “qualified person” for the purposes of National Instrument 43-101 - Standards of Disclosure for Mineral Projects, and a Geologist employed by TerraLogic Exploration Inc., has reviewed and approved the scientific and technical disclosure in this news release relating the Knife Lake Project

About Rockridge Resources Ltd.

Rockridge Resources is a publicly traded mineral exploration company focused on the acquisition, exploration, and development of mineral resource properties in Canada and other mining-friendly jurisdictions. The Company's Knife Lake Project is in Saskatchewan, which is ranked as one of the top mining jurisdictions in the world by the Fraser Institute. The project hosts the Knife Lake deposit, which is a VMS, near-surface copper-cobalt-gold-silver-zinc deposit open along strike and at depth.  The Company’s Raney Gold Project is a high-grade gold exploration project located in the same greenstone belt that hosts the world-class Timmins and Kirkland Lake lode gold mining camps. Rockridge’s goal is to maximize shareholder value through new mineral discoveries, committed long-term partnerships, and the advancement of exploration projects in geopolitically favorable jurisdictions.

Additional information about Rockridge Resources and its project portfolio can be found on the Company’s website at www.rockridgeresourcesltd.com.

Rockridge Resources Ltd.

“Jonathan Wiesblatt”

                                                           
Jonathan Wiesblatt
CEO

For further information contact myself or:

Jordan Trimble, President or
Spencer Coulter, Corporate Communications
Rockridge Resources Ltd.
Telephone: 604-687-3376
Toll Free: 800-567-8181
Facsimile: 604-687-3119
Email: info@rockridgeresourcesltd.com

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE CONTENT OF THIS NEWS RELEASE.

Forward Looking Information 

This release includes certain statements that may be deemed to be "forward-looking statements". All statements in this release, other than statements of historical facts, that address events or developments that management of the Company expects, are forward-looking statements. Statements included in this announcement, including statements concerning our plans, intentions and expectations, which are not historical in nature are intended to be, and are hereby identified as, “forward-looking statements”. Forward-looking statements may be identified by words including “anticipates”, “believes”, “intends”, “estimates”, “expects” and similar expressions. Although management believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance, and actual results or developments may differ materially from those in the forward-looking statements. The Company undertakes no obligation to update these forward-looking statements if management's beliefs, estimates or opinions, or other factors, should change. Factors that could cause actual results to differ materially from those in forward-looking statements, include market prices, exploration and development successes, continued availability of capital and financing, and general economic, market or business conditions. Please see the public filings of the Company at www.sedar.com for further information.